1.5kw Dual Nozzle XJ25-1.5DCTH4-Z

1.5kw Hydro Turbine

Model No: XJ25-1.5DCTH4-Z
Output/Power: 1500 watt
Rated Head: 15 Meters
Rated Flow: 12 – 18 (l/s)

Our Micro Hydro Turbine Power Generator 1.5kw Dual Nozzle, model: XJ25-1.5DCTH4-Z.OFF grid generator is Permanent Magnet Synchronous Generator.

We supply AC output, you will not need inverter. If you want to keep electricity in batteries, then we supply a device AC-DC Adaptor.

If you want to grid tie it, we will supply a asynchronous generator, then you can connect it to state grid directly, no need an inverter. We supply a grid tie controller set with system.

Inside generator controller, we have automatic voltage regulator device, so you will get steady voltage.

With lesser flow, the wattage output and current reduce, but voltage keeps a steady value.

Controller also have electric load,when you have no consumption,the load can consume excessive electricity.

We can adjust voltage according to the your requirements. We can provide 240v-220v—110v, 50hz –60hz.

Normal life of this hydro turbine is 20 years. You only need Simple maintenance and periodically lubrication.

If you need a quote, please provide correct water head, flow rate, pipe line diameter, pipe material and pipe length.

Main Parameters
No. Items Parameters Remarks
1 Model XJ25-1.5DCTH4-Z Dual  Nozzle

Turgo Turbine

2 Rated Head 15 (meters)
3 Rated Flow 12–18 (l/s)
4 Output 1500 (W)
5 Efficiency 70 (%)
6 Pipe Diameter 125-150 (mm)
Generator
No. Items Parameters Remarks
1 Model SF1.5-4  Permanent Magnet Generator
2 Style PMG
3 Output 1500 (W)
4 Voltage 230 or 110 (V)
5 Current 6.52 (A)
6 Frequency 50 or 60 (HZ)
7 Rotary Speed 1500 (RPM)
8 Phase Single (Phase)
9 Power Factor 1.0
10 Altitude ≤3000 (meters)
11 Insulation Grade B / B
12 Protection Grade IP44
13 Temperature -25~+50
14 Relative Humidity ≤90 %
Control Box / Control Panel
No. Items Parameters Remarks
1 Model WY1.5-1  
2 Safety Protection Short circuit Protection
3 Insulation Protection
4 Over Load Protection
5 Grounding Fault Protection
Packing
No. Items Parameters Remarks
1 Packing Material Fiberboard  
2 Packing Size 88×60×55 (CM)
4 Gross Weight 108 (KGS)
NO. Name Picture Quantity G.S.
1 Micro-hydro Turbine Generator unit Micro-hydro Turbine Generator unit 1 Set
2 Butterfly Valve Butterfly Valve 1 Set
3 Reducer Pipe Reducer Pipe 1 Set
4 Expansion Bend Expansion Bend 1 Set
5 Load for Constant Voltage Regulator Load for Constant Voltage Regulator 1 Set
6 Asbestos Pad Asbestos Pad 2 Set
7 Foot Screw Foot Screw 4 Set
8 Butterfly Valve Screw Butterfly Valve Screw 8 Set
9 Expansion Bend Screw Expansion Bend Screw 8 Set
10 Grease lubricant Grease lubricant 1 Set
11 Certification Certification 1 Copy
12 English Version User Guide 1 Copy
13 Installation Dimension Chart   1 Copy
Local Team Installation Support On Micro Hydro Power Generators

Listen to What Our Clients Say About Our Micro Hydro Power Generators

Aak a Quick Quote