300w Hydro Generator

Key Specifications/Special Features of 300W Hydro Turbines:

Water head range: 12 to 14m
Water flow range: 4L to 5L/Second
Power output:  300W

Voltage: 115 or 230V AC
Penstock diameter: 50mm

Water to wire system with integral turbo turbine, generator and valve flow control

Brushless, special rare-earth permanent magnet alternator

Higher efficiency than ordinary alternator

Output voltage and frequency are controlled by the electronic load controller (with ballast)

Machine is compact, easy to install and requires little maintenance except lubricating the bearing every few months

Water is collected upstream from the turbine and channeled in a pipe down to the turbine location

At the turbine, the water passes through a nozzle, where it accelerates, strike the turbine runner and turns a AC single-phase brushless permanent magnet alternator

Electric load controller is built on the alternator which stabilizes the voltage to 110V or 220V to protect electrical appliances during use

Installation is very simple and explained in the manual

Once installed there are no running costs and maintenance costs are very low

Packing size: 30 x 26 x 35cm

Weight: 24kg

Micro-hydroelectric/Water Turbine Generator with 50mm Penstock Diameter and 300W Output Power

300W hydro turbine generator